We were able to get you a replacement Cover. We will be sending this out to you.

Here is how to install.

Step 1: Remove 3 securing bolts from Scooter
-1 2.5mm Hex Bolt



-2 Philips Screws



Step 2: Using a flat head screwdriver or thin flat tool, gently wiggle off the top cover to expose computer and wires.



Step 3: Remove 5 tiny Philip Screws holding display to cap





Step 4: Install computer onto new cap using 5 tiny Philips screws

Step 5: Reinstall cap onto scooter

Step 6: Reinstall 2 Philips screws & 1 2.5mm hex bolt